Sold Out
Isostatic Press等静压机 H
H型冷等静压机
H型结构的等静压机适合缸径φ350mm以上深度800mm以上,该机型是我公司自主研发的一款产品，结构简单合理，故障率低，适合中大型等静压机结构，深受中小制造企业的欢迎。
具备以下优点：
设备结构简单、合理、机械故障率底；
增压器装有油水隔离装置，防止密封老化后水进入增压油缸污染液压油；
卸压分为快泄和慢泄两级油压卸压，卸压速度可调；
主要部件高压腔和框架采用严格计算，预应变张力钢丝缠绕结构，具有重量轻抗疲劳高，使用寿命长、更安全可靠；
全自动可编程控制器控制，配置人机界面真实反映工作缸实际压力，操作简单；
设有应急、手动卸压装置，以防在超高压堵塞时无法泄压造成危险。
H type cold isostatic press
The H-type structural isostatic press is suitable for a cylinder diameter of φ350mm or more and a depth of 800mm or more. This model is a product independently developed by our company. It has a simple and reasonable structure and a low failure rate. It is suitable for medium and large isostatic press structures and is well received by small and medium-sized manufacturers. Business welcome.
Has the following advantages:
The equipment structure is simple and reasonable, and the mechanical failure rate is low;
The supercharger is equipped with an oil-water isolation device to prevent water from entering the supercharged cylinder and contaminating the hydraulic oil after seal aging;
Pressure relief is divided into two stages of oil pressure relief: fast relief and slow relief, and the pressure relief speed is adjustable;
The main components of the high-pressure chamber and frame adopt a strictly calculated, pre-strained tensioned steel wire winding structure, which is light in weight, high in fatigue resistance, long in service life, safer and more reliable;
Fully automatic programmable controller control, equipped with a human-machine interface that truly reflects the actual pressure of the working cylinder, and is easy to operate;
It is equipped with emergency and manual pressure relief devices to prevent danger caused by failure to relieve pressure when ultra-high pressure is blocked.
H型冷等静压机
H型结构的等静压机适合缸径φ350mm以上深度800mm以上,该机型是我公司自主研发的一款产品，结构简单合理，故障率低，适合中大型等静压机结构，深受中小制造企业的欢迎。
具备以下优点：
设备结构简单、合理、机械故障率底；
增压器装有油水隔离装置，防止密封老化后水进入增压油缸污染液压油；
卸压分为快泄和慢泄两级油压卸压，卸压速度可调；
主要部件高压腔和框架采用严格计算，预应变张力钢丝缠绕结构，具有重量轻抗疲劳高，使用寿命长、更安全可靠；
全自动可编程控制器控制，配置人机界面真实反映工作缸实际压力，操作简单；
设有应急、手动卸压装置，以防在超高压堵塞时无法泄压造成危险。
H type cold isostatic press
The H-type structural isostatic press is suitable for a cylinder diameter of φ350mm or more and a depth of 800mm or more. This model is a product independently developed by our company. It has a simple and reasonable structure and a low failure rate. It is suitable for medium and large isostatic press structures and is well received by small and medium-sized manufacturers. Business welcome.
Has the following advantages:
The equipment structure is simple and reasonable, and the mechanical failure rate is low;
The supercharger is equipped with an oil-water isolation device to prevent water from entering the supercharged cylinder and contaminating the hydraulic oil after seal aging;
Pressure relief is divided into two stages of oil pressure relief: fast relief and slow relief, and the pressure relief speed is adjustable;
The main components of the high-pressure chamber and frame adopt a strictly calculated, pre-strained tensioned steel wire winding structure, which is light in weight, high in fatigue resistance, long in service life, safer and more reliable;
Fully automatic programmable controller control, equipped with a human-machine interface that truly reflects the actual pressure of the working cylinder, and is easy to operate;
It is equipped with emergency and manual pressure relief devices to prevent danger caused by failure to relieve pressure when ultra-high pressure is blocked.